• TEL: 0086-13083697781

astm a553 a553m ferrobend

Get Price

We can supply you need astm a553 a553m ferrobend.

9% Nickel Steel:For use at cryogenic temperatures

Tensile Properties (ASTM, ASME, API Requirement) Tensile Strength ksi [MPa] Yield Strength ksi [MPa], min. Elongation in 2" [50mm](%) (S)A353/ (S)A353M 100 - 120 [690 825] 75 [515] 20 (S)A553/ (S)A553M Type I 100 120 [690 825] 85[585] 20 API Requirement Charpy V-Notch Impact Values3 Size of Specimen 2 (mm) Transverse Value 9% Nickel Steel:For use at cryogenic temperaturesTensile Properties (ASTM, ASME, API Requirement) Tensile Strength ksi [MPa] Yield Strength ksi [MPa], min. Elongation in 2" [50mm](%) (S)A353/ (S)A353M 100 - 120 [690 825] 75 [515] 20 (S)A553/ (S)A553M Type I 100 120 [690 825] 85[585] 20 API Requirement Charpy V-Notch Impact Values3 Size of Specimen 2 (mm) Transverse Value

A671 Spec Sheet American Piping Products

5.3.1 Classes 20, 21, 22 and 23 pipe shall be uniformly heated within the post-weld heat-treatment temperature range indicated in the table below for a minimum of 1 hour per inch (0.4 hr/cm) of thickness or for 1 hour, whichever is greater.. 5.3.2 Classes 30, 31, 32 and 33 pipe shall be uniformly heated to a temperature in the austenitizing range and not exceeding the maximum ASTM A20 / A20M - 18 Standard Specification for General A553/A553M Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel. A562/A562M Specification for Pressure Vessel Plates, Carbon Steel, Manganese-ium for Glass or Diffused Metallic Coatings. A577/A577M Specification for Ultrasonic Angle ASTM A553 Type I Ni-alloy steel plates for pressure ASTM A553 Type I in the standard ASTM A553/A553M is a kind of Ni alloy steel plates material used to fabric high temperature pressure vessels, the composition of Ni is 8% and 9%. A553 have two types . They are :type I and type II . A553 Type I need to be done the (Quenching + Tempering ) heat-treatment to meet the property requirement in the standard ASTM A553/A553M.

ASTM A553 Type I Ni-alloy steel plates for pressure vessels

ASTM A553 Type I in the standard ASTM A553/A553M is a kind of Ni alloy steel plates material used to fabric high temperature pressure vessels, the composition of Ni is 8% and 9%. A553 have two types . They are :type I and type II . A553 Type I need to be done the (Quen ASTM A553/A553M :Standard Specification for Pressure ASTM A553/A553M 2017 Edition, November 1, 2017. Complete Document Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel Includes all amendments and changes through Editorial Change 1, December 2019. View Abstract Product Details ASTM A553/A553M-17 - Standard Specification for Pressure ASTM A553/A553M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel. 1.1 This specification 2 covers 7, 8, and 9 % nickel alloy steel plates for use in the water quenched and tempered condition intended

ASTM-A553, 2006 - MADCAD

ASTM A553/A553M-06 Historical Standard:ASTM A553/A553M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel . SUPERSEDED (see Active link, below) ASTM A553 / A553M . 1. Scope . 1.1 This specification covers 8 and 9 % nickel alloy steel plates for use in the water quenched and tempered ASTM-A553, 2010 - MADCADASTM A553 / A553M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel . Active Standard ASTM A553 / A553M Developed by Subcommittee:A01.11 . Book of Standards Volume:01.04 ASTM-A553/A553M, 2014 - MADCADDescription of ASTM-A553/A553M 2014 1.1 This specification 2 covers 7, 8, and 9 % nickel alloy steel plates for use in the water quenched and tempered condition intended for the fabrication of welded pressure vessels.

ASTMA553-A553M-14.pdf-stdlibrary

Last previous edition approved in 2010 as A553/A553M 10.DOI 10.1520/A0553_A0553M-14.2For ASME Boiler and Pressure Vessel Code applications, see related Specifi-cation SA-553/SA-553M in Section II of that Code.3For referenced ASTM standards, visit the ASTM website, astm, orcontact ASTM Customer Service at serviceastm. Supply ASTM A553 Type II Ni-alloy steel plates for Ni alloy steel plates material used to fabric high temperature pressure vessels, the composition of Ni is 8% and 9%. A553 have two types . They are :type I and type II . A553 Type II need to be done the (Quenching + Tempering ) heat-treatment to meet the property requirement in the standard ASTM A553/A553M. astm a553, astm a553 Suppliers and Manufacturers at offers 65 astm a553 products. About 38% of these are Steel Sheets. A wide variety of astm a553 options are available to you, such as type, standard, and material.

ASTM A553 / A553M - 06 Standard Specification for Pressure

ASTM A553 / A553M - 06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel SUPERSEDED (click for Active standard)

Get Price

We can supply you need astm a553 a553m ferrobend.